SolveNCERT
SolveNCERT
HomeSolutionsAdvanced ScienceCh 3Check Your Understanding (Turning Forces)
Class 9 · Advanced ScienceNCERT 2026 Revised Syllabus

Chapter 3: Newton’s Laws of Motion

Check Your Understanding (Turning Forces) — 7 questions with step-by-step answers.

Check Your Understanding (Turning Forces)(7 questions)

1

Why is it easier to open a door when you push at the handle rather than near the hinges?

Board Level Answers

Ans.
Solution:- Torque depends on distance from the pivot. - Pushing farther from the hinge (at the handle) produces greater turning effect for the same applied force.Answer: Pushing at the handle gives a larger distance from the hinge, producing greater torque for the same force.
2

A force is applied to a wrench at different angles. At which angle will the rotating force be maximum? What happens when force is applied parallel to the wrench?

Board Level Answers

Ans.
Solution:- Torque is maximum when the force is applied at 90 degrees (perpendicular to the wrench). - When force is applied parallel to the wrench, the turning effect (torque) becomes zero.Answer: Maximum at 90°; torque becomes zero when the force is parallel to the wrench.
3

Two students apply the same force to open a gate, one perpendicular at 20 cm from the hinge, the other at 80 cm. Who produces greater torque? Justify.

Board Level Answers

Ans.
Solution:- Torque = force × distance from the pivot. - For the same force, a larger distance gives a larger torque.Answer: The student pushing at 80 cm produces greater torque.
4

Is it possible for a force to act on a body and still produce zero turning about a fixed point? Give a real-life example.

Board Level Answers

Ans.
Solution:- Yes, when the line of action of the force passes through the pivot point (angle 0° or 180°). - Example: pushing a door directly toward its hinge line produces no rotation.Answer: Yes, when the line of action passes through the pivot; e.g. pushing a door directly toward its hinge line.
5

Two forces act on a rod pivoted at its centre: 10 N downward at 0.5 m on the left, and 10 N downward at 0.5 m on the right. Will the rod rotate? Explain.

Board Level Answers

Ans.
Solution:- Left torque $= 10 \times 0.5 = 5 \text{ N m}$ (clockwise). - Right torque $= 10 \times 0.5 = 5 \text{ N m}$ (anticlockwise). - Torques are equal in magnitude but opposite in direction, so they cancel.Answer: No, the rod will not rotate; the torques cancel and the rod remains balanced.
6

How can a mechanic loosen a tight bolt using a long spanner instead of applying a very large force? Explain using the torque formula.

Board Level Answers

Ans.
Solution:- Torque = force × distance from the pivot. - Increasing the spanner's length increases the distance from the pivot. - A larger torque is produced with a smaller applied force.Answer: A long spanner increases the distance from the pivot, producing a larger torque with a smaller force.
7
Hard

A force of 20 N is applied to a door at 0.8 m from the hinge. Calculate the torque when the force is applied at (a) 90 degrees (b) 60 degrees (c) 30 degrees.

  1. a.(a) 90 degrees
  2. b.(b) 60 degrees
  3. c.(c) 30 degrees

Board Level Answers

Ans.
Solution:Torque $= F \times d \times \sin\theta$(a) 90°: $20 \times 0.8 \times 1 = 16 \text{ N m}$(b) 60°: $20 \times 0.8 \times 0.866 = 13.86 \text{ N m}$(c) 30°: $20 \times 0.8 \times 0.5 = 8 \text{ N m}$Answer: (a) 16 Nm, (b) 13.86 Nm, (c) 8 Nm.

Other Chapters